|
| |
WWII Vehicles Kits
home >
World War 2 Store > WWII
Kits > World War 2 Vehicle Kits.
|
French Armored Carrier UE 1/35 Kit
Designed to tow light artillery and to supply
infantry units on the front lines, more than 4,800 of these light armored
carriers were built by 1940. This finely detailed 1/35 scale plastic kit
features a trailer; a movable cargo compartment; six wooden crates, two fuel
drums and large and small canvas bundles; a choice of headlight and tow hook
parts to depict Series 2 and 3 variants; two crew torsos and two soldier
figures with MAS36 rifles; a choice of markings and more. Assembly required. |
|
U.S. 2½-Ton 6x6 Cargo Truck 1/48 Kit
Replicating one
of the unsung heroes of World War II, the M35 supply truck, this 1/48 scale
plastic kit features a die cast chassis with metal screws for easy truck
body assembly; a removable cab top with realistic canvas texture; a fully
outfitted cab with a driver figure; an optional-position tailgate; a choice
of two markings, including those of the 49th Truck Company, 3886th
Transportation Corps, which operated on the famous Red Ball Express supply
chain that was created after the Allied invasion of Normandy; and more.
Measures approximately 5¼" long; 80+ parts, assembly required. |
|
WWII Military Ground Vehicle Set 1/72 Kit
You get three World War II U.S. transport vehicles in one box! These 1/72
scale plastic kits - an M3A1 half-track, an amphibious Ford GPA Seep and a
Harley-Davidson WLA 45 motorcycle - feature textured surfaces with simulated
rivets, fully outfitted interiors, slide molded tracks and treaded tires,
complete armament for the half-track, detailed accessories such as Jerry
cans, authentic markings and more. 96 parts, assembly required. |
|
German Krupp Protze Kfz.69 1-Ton Towing Truck 1/35 Kit
Designed to tow a 3.7cm PaK 35/36 anti-tank gun, the
Krupp Protze Kfz.69 was standard equipment in anti-tank artillery divisions
on the Eastern and Western fronts in World War II. This amazingly detailed
1/35 scale plastic kit features a realistic suspension; a clear windshield;
accessories such as ammunition boxes, shell cases, rifles and a shovel; a
driver and three crew figures; a choice of four markings from 1941; and
more. Measures 9¾" long; assembly required. |
|
Willys MB Jeep 1/48 Kit
Replicating the iconic
U.S. Army Jeep of World War II - more than 360,000 Willys MBs were produced
from 1942 to 1945 - this 1/48 scale plastic kit features engraved surface
details, a folding windshield, a detailed engine and underframe, a Browning
M1919 .30 caliber machine gun with a pedestal mount, accessories such as
tools and a jerry can, driver and officer figures, a choice of three
markings including those of the 101st Airborne Division in 1944 France, and
more. 2¾" long; 66 parts, assembly required. |
|
German 18-Ton Heavy Half-Track FAMO 1/35 Kit
Used to recover damaged or broken tanks from
World War II battlefields, the Sd.Kfz.9 "Famo" 18-ton half-track was a
dependable and valuable workhorse. This stunningly detailed 1/35 scale
plastic kit features textured surface areas, a movable windshield, a
detailed Maybach HL108 engine, optional side panels, a working winch and
coupler, a tow bar, a tool storage hatch, movable front rubber tires with
authentic treading, a choice of four markings, eight soldier figures and
more. Measures 9¼" long; 200+ parts, assembly required. |
|
Autoblinda AB 43
Replicating an
Italian AB 43 armored car that was used by German units - as PanzerSpahWagen
AB 43 203(i) - on the Italian Front, this 1/35 scale plastic kit features a
large turret, a 20mm Breda 35 cannon, an 8mm machine gun, steerable wheels,
six vinyl tires, accessories such as jerry cans and pioneering tools, a
choice of four markings including three German and one post-war Italian, and
more. Measures 5¾" long; 145 parts, assembly required. |
|
LVT-2 Amtrac 1/35 Kit
United States
Depicting an LVT-2
"Water Buffalo" amphibious vehicle that was first used during the assault on
Tarawa, in which it ferried Marines across the coral reef and through the
shallows to the beach, this 1/35 scale plastic kit features a detailed
interior, armament, realistic-looking tracks, authentic markings and more.
8¾" long; 163 parts, assembly required. |
|
Mörser Karl Gerät 040/041 1/35 Kit
Germany
Replicating a 124-ton
"Karl" siege mortar, this premium quality 1/35 scale plastic kit features
exquisite surface details including bolt heads and panel lines, a detailed
upper hull with photo-etched brass parts, a choice of early and late mortar
chassis that can be assembled in the traveling or firing modes, 600mm and
540mm barrels, metal axles and springs for the gun recoil, two aluminum
shells, two sets of continuous vinyl tracks, eight artillery crew figures,
authentic markings, and more. 12½" long; assembly required. |
|
U.S. M151A1 MUTT 1/35 Kit
Replicating a
Ford-built M151A1 Military Utility Tactical Truck (MUTT) that served in
Vietnam in the late 1960s, this 1/35 scale plastic kit features a fully
outfitted interior with a steering wheel, a dash panel, a shifter and brake
levers; a M60 rifle on a pedestal mount; a detailed drive train, exhaust and
suspension; realistic accessories; a choice of two U.S. Army markings from
1967 and '68; and more. 3¾" long; assembly required. |
|
German Sd.Kfz.250/3 Greif 1/48 Kit
Replicating Erwin
Rommel's personal half-track, this 1/48 scale plastic kit features a die
cast chassis, a detailed interior with radio equipment, the prototype's
unique frame-type radio antenna mounted on the roof, a detailed front
suspension, easy-to-assemble tracks, two crew figures and a figure of Rommel,
authentic DAK markings, and more. Measures approximately 4" long; 80+ parts,
assembly required. |
|
U.S. M8 Greyhound Light Armored Car 1/48 Kit
Replicating an M8 Greyhound, this 1/48 scale plastic
kit features an open turret with a fully outfitted interior, a 37mm main gun
and a coaxial .30 caliber machine gun, metal chassis parts for added weight,
a detailed suspension system, tires with a realistic tread design, a U.S.
soldier figure, a choice of two markings, and more. 4" long; assembly
required. |
|
M16 Multiple Gun Motor Carriage 1/35 Kit
Replicating the MGMC
anti-aircraft variant of the M3 half-track - fitted with a Maxson M45 mount
and four Browning M2HB machine guns - this amazingly detailed 1/35 scale
plastic kit features textured surfaces; a detailed driver's compartment; a
fully outfitted fighting compartment with a quad .50 machine gun and
ammunition cans; driver, radio operator and gunner figures; a front winch
assembly; rubber tires and tracks; a choice of World War II and post-war
markings; and more. 7" long; assembly required. |
|
Volkswagen Type 82E Staff Car 1/48 Kit
Replicating a
Volkswagen Type 82E - which combined a sedan body with a Kubelwagen chassis
for high clearance and excellent performance over rough terrain - employed
as a staff car during World War II, this easy-to-assemble 1/48 scale plastic
kit features textured surfaces, a detailed interior with glazed windows and
a driver figure, realistic off-road tires, a choice of three German military
markings, and more. 3" long; assembly required. |
|
Horch Type 1a 1/35 Kit
Replicating a German
4x4 personnel carrier used in World War II, this 1/35 scale plastic kit
features textured surfaces, a detailed interior, glazed windows, realistic
treaded tires including side-mounted spares, a driver figure, authentic
markings, and more. Measures 5½" long; assembly required. |
|
U.S. Army Staff Car 1/48 Kit
Replicating a 1942 sedan employed as a World War II staff car, this 1/48
scale kit features textured surfaces, a die cast metal chassis, a detailed
interior with glazed windows and a driver figure, a prototypical grille and
headlight arrangement, realistic tire treads, authentic U.S. Army markings,
and more. 4" long; assembly required.
|
|
